BLOG
Multi I/O Training Board for M1S
10
Nov
Nov
Multi I/O Training Board is designed to help one to add or extend various peripheral connections to GPIO pin header that used be done using jumper wires. Separating signals on GPIO header to multiple connections per different type of signals, this will help to easy wiring to peripheral devices and evaluate them. Also this board include several simple components that helps to test or use hardware functions.
! NOTE !
This product is only compatible with ODROID-M1S with 4/8GByte RAM + IO Header
Specifications
| Form Factor | Board dimension : 90 (L) x 65 (W) x 16 (H) mm |
| I/O | 2x I2C bus (J4 & J7, J7 is dedicated for 128×64 OLED display |
| 1x LED | |
| 1x RTC (PCF8563) with backup battery socket (CR1620) | |
| 5x tack switches | |
| 2x buttons (SW1 is for power & SW2 is for board reset) | |
| 1x 2CH ADC input | |
| 1x RS232 port | |
| 2x SPI connection (J5 & J9) | |
| 1x GPIO input/output | |
| 1x MOSFET (IRLR2905TRPBF) output (PWM) | |
| 1x 5V FAN control output (PWM) |
WIKI : https://wiki.odroid.com/accessory/add-on_boards/multiioboard
More Information : https://www.hardkernel.com/shop/multi-i-o-training-board-for-m1s/
