BLOG

Vu8S 8inch MIPI LCD for M1S

Posted on by pinkodroid
10
Nov

The four-lane MIPI-DSI port can be directly connected to a LCD panel.
A 8inch 800×1280 wide viewing angle LCD and capacitive multi-touch screen is pre-assembled.
The ODROID-Vu8S is dedicated to ODROID-M1S. It can only be used via a MIPI DSI Connector(J7) on M1S.
The I type Bracket boards are required to dock Vu8S to assembled ODROID-M1S with case.

♦ If you activate the MIPI-DSI interface, the HDMI output function will be disabled automatically.
This is because HDMI and MIPI-DSI can NOT be used simultaneously due to system memory bandwidth limitations.

Package includes

A. Assembled 8inch TFT LCD + multi touch screen * 1EA
B. M3 x 40(BLACK) Support * 3EA including a spare part
C. M3 x 7(BLACK) Bolt * 7EA including a spare part
D. M3 x 5(SILVER) Bolt* 5EA including a spare part
E. Vu8S LCD Frame Board for M1S * 1EA
F. Vu8S I form Bracket Board for M1S * 2EA

Software Setting

Specifications

  • 8-inch TFT-LCD
  • Portrait 800(H) x 1280(V) pixels hardware native resolution
  • Mechanical Dimensions : 202(W) x 153.0(H)
  • Viewable screen size : 172.224 x 107.64 mm (active area)
  • 5 finger capacitive touch input
  • Power consumption : 2.4W ± 10% (100% duty cycle)

WIKI : https://wiki.odroid.com/accessory/display/vu_series/vu8s

More information : https://www.hardkernel.com/shop/vu8s-8inch-mipi-lcd-for-m1s/

 

pinkodroid