ODROID-H3+ has same form factor and similar power efficiency as their predecessor, the ODROID-H2+. But, H3+ is more powerful, offers higher performance. With great compatibility, a brand new x86 64-bit single board computer with large memory capacity and advanced IO ports.
-
Intel® Quad-Core Processor Jasper Lake N6005 has a base clock of 2GHz and a boost clock of 3.3GHz with 1.5MB L2 and 4MB L3 cache by a 10 nm process.
-
Up to 64GB Dual-channel Memory DDR4 PC4-23400 (2933MT/s)
-
Two SO-DIMM slots, up to 32GB per slot
-
PCIe 3.0 x 4 lanes for one M.2 NVMe storage
-
2 x 2.5Gbit Ethernet ports
-
2 x SATA 3.0 ports
-
SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)
-
Intel UHD Graphics 32 EUs Turbo 900MHz
-
HDMI 2.0 and DP 1.2 multiple video outputs
- A configurable Unlimited Performance mode allowing the CPU to run in sustained turbo boost mode.
- RTC / BIOS backup battery is included
Board Detail
-
A. CPU (Intel Pentium Silver N6005)
-
B. 2 x DDR4 SO-DIMM slots (Dual channel memory support)
-
C. 1 x M.2 PCI Express Module Socket (NGFF-2280)
-
D. 1 x eMMC (Embedded Multimedia-Card) Socket
-
E. 2 x SATA Power Connectors (2.5mm pitch, JST-XH compatible connector)
-
F. 2 x SATA3 6.0 Gb/s Data Connectors
-
G. 1 x DC Power Jack
-
H. 2 x USB 3.0
-
I. 2 x USB 2.0
-
J. 1 x HDMI 2.0
-
K. 1 x DisplayPort 1.2
-
L. 2 x RJ45 Ethernet Ports (10/100/1000/2500)
-
M. 5 x System LED Indicators
-
N. 1 x Peripheral Expansion Header (24-pin)
-
O. 1 x Power Switch
-
P. 1 x Reset Switch
-
Q. 1 x Backup Battery Connector (2-pin)
-
R. 1 x Active Cooling Fan Connector (4-pin)
-
S. 1 x Audio out, 1 x Audio in, 1 x SPDIF out
How to distinguish the board
- H3 : Green round sticker is attached on the product serial label.
- H3+ : Yellow round sticker is attached on the product serial label.
Or, QC PASS sticker is attached.
Specifications
Processor | Intel Celeron N6005 Processor (10nm, Quad-Core, TDP 10W)
H3+(N6005) : up to 3.3Ghz 4MB L2 Cache Intel UHD Graphics (24/32 EU up to 900MHz) |
Memory | 2 x DDR4 1.2V SO-DIMM slots
Dual Channel, up to 2933 MT/s (DDR4-PC23400) Max memory capacity 64GB DDR3/DDR5 are not supported |
Storage | 1 x eMMC connector (bootable and selectable on BIOS)
Various eMMC modules can be purchased at Hardkernel store 2 x SATA3 6Gbps ( SATA Port-Multiplier is NOT compatible ) 1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards) M.2 SATA SSD is not supported |
Networking | 2 x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)
Realtek RTL8125B Supports Wake-On-Lan LED indicators (Green: Link, Amber: Traffic) |
Video | 1 x DisplayPort 1.2 (up to 4K@60Hz)
1 x HDMI 2.0 (up to 4K@60Hz) Dual simultaneous display support |
Audio | 1 x Audio out (3.5mm jack)
1 x Audio in (3.5mm jack) 1 x SPDIF out (ALC1200, HDA codec) * HDMI & DP have audio output too. |
External I/O | 2 x USB 3.0 Host ports
2 x USB 2.0 Host ports 1 x Peripheral Expansion Header (24-pin, 2.54mm pitch) – 1 x DC 5V, 1 x DC 3.3V, 5 x GND – 1 x UART (TXD/RXD/RTS/CTS) – 2 x I2C (SCL/SDA) – 1 x External Power Button – HDMI CEC via add-on board, 5VA+ – 3 x USB 2.0 – All 3.3V I/O signal level |
Other features | Passive Heatsink
BIOS Backup Battery – Maintains system time and BIOS settings Power Button Reset Button System LEDS Indicators: – Red (PWR) – Solid light when DC power is supplied – Blue (left, SLEEP) – turns off only when the system enters into suspend mode – Blue (right, PMIC) – turns on only when the major power rails are working – Amber (SATA) – Flashes when SATA data transfers – Green (NVMe) – Flashes when NVMe data transfers Active Cooling Fan Connector (12V 4-pin, PWM input + TACHO output) – Active Cooling Fan is optional – Connector (4-pin, 2.54mm pitch) |
Power | DC jack : outer (ground) diameter 5.5mm, inner(positive) diameter 2.1mm
DC 14V ~ 20V (up to 60W) – DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs – DC 19V/7A power adapter is recommended if you two 3.5” HDDs together Power consumption: – IDLE : ≃1..9W – CPU Stress : ≃15W – CPU+GPU Stress : ≃18W – Power-off : ≃0.25W – Suspend : ≃0.6W |
Form Factor | 110mm x 110mm x 47mm Approx. |
Caution!!
ODROID boards do not support the hotplug function of storage devices, and replacing SATA, eMMC, or NVMe while the system power is on will cause serious damage to the board and devices.
Installation
https://wiki.odroid.com/odroid-h3/start#installation
WIKI
https://wiki.odroid.com/odroid-h3/start
Introduction
https://dn.odroid.com/ODROID-H2/H3_pics/H3_H3+_Introduction.pdf
GTIN : 8809543642478
- The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
- HDMI, HDMI High-Definition Multimedia Interface(고화질 멀티미디어 인터페이스), HDMI 트레이드 드레스 및 HDMI 로고라는 용어는 HDMI Licensing Administrator, Inc.의 상표 또는 등록 상표입니다.
Compatible Products
Display
Connectivity
Connectivity
Add-on Boards
Memories
x86
Memories
Memories
Memories
Memories
Cases
Cases
Cases
Cases
Cases
Cases
Cases
Power Supply & Battery
Memories
Power Supply & Battery
Cases
Memories
Memories
Memories
Memories
Display
Power Supply & Battery
Power Supply & Battery