The easy way to make a Green platform. The ODROID Smart Power3 is an easily deployable power supply that collects voltage, current and power of the system load to enable developers to optimize energy consumption. LCD shows voltage, current and watt simultaneously. You can also see the graphical energy transient on your PC via USB interface.
Components
PACKAGE INCLUDES :
-
ODROID Smart Power3
-
USB-C data cable
-
DC plug cable(5.5mm/2.1mm) x 2(L type/S type) for ODROID-XU4/ODROID-N2/ODROID-C4
REQUIRED (NOT INCLUDED) :
(3pin AC power cord is not included for 19V/7A Power supply. You need a generic PC power supply AC power cord.)
Specifications
Output Channels | Two output channels (Max 50W + 50W) | |
Output Voltage | DC 3.0 V ~ Input voltage -1 V | |
Output Current | DC 3A (Max) per channel | |
Measurement | Voltage, Current, Watt : Maximum sampling rate : 200Hz (5msec interval) | |
Tolerant | 3% typical | |
MCU | ESP32-WROOM-32E | |
LCD | 480×320 3.5“ TFT LCD IPS grade wide viewing angle | A |
LED | RED(Power), BLUE(Alive) | C, D |
Button | ON/OFF/Menu/Cancel, Output Channel On/Off | B, E, F |
Encoder Button | Select/Setup | G |
Encoder Dial | Adjust Voltage and Ampere | |
USB-C port | Data communication with PC (5ms ~ 1s sampling rate), F/W Upgrade | H |
Output Terminal | 4mm diameter banana jack x 2 | J, I |
Input Voltage | DC 9V ~ 21V | K |
- Any UPS or batteries are not compatible with SmartPower3. If you want to use SmartPower3 with them, you should add diodes. Please refer to related case below.
link : https://forum.odroid.com/viewtopic.php?p=340404#p340404
Hardware (Schematics & Data sheet)
WIKI : https://wiki.odroid.com/accessory/power_supply_battery/smartpower3
GTIN : 8809543643093
Compatible Products
Power Supply & Battery
Cables
Obsolete Products
Power Supply & Battery
Power Supply & Battery
Power Supply & Battery
Power Supply & Battery
Power Supply & Battery